Date:Jan. 23, 2018

Hours:1.5

Brief Description:Deburr, deburr, deburr, match drill, countersink.


Deburr, match drill, and countersink

Deburred R-1002 rudder spar and R-1007 styker plates. Match drilled and counter sunk R-1007 with R-1002 and the rudder horn. Clecoed R-1015 stiffeners with the shear webs and final drilled. Clecoed the sub assemblies to the rudder spar. Thinking about putting the nut plates in the rudder and elevator for static wicks but no decision yet.

Had another oblong hole issue so ordered a replacement R-1002.  This picture is of the SCRAP R-1002 before replacement.

This picture is of the SCRAP R-1002 before replacement.