Jul. 16, 2018
Got a few elevator ribs deburred. Used the 6″ bench grinder subsidised by the 1″ #7 3M wheel on the die grinder.
View DetailsJul. 01, 2018
I started the first one with my tin snips and found that the snips would bend the material as it was cut. So far the snips have gotten very little use. I used the bandaw with much greater success. I...
View DetailsJun. 30, 2018
Got all (16) E-1008 elevator ribs clear of their protective plastic, marked them with a steel ruler.
View Details